Filter Icmpv6 - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Log State
Trap State
Ports
State
VID List
Source IP Address
Ports
Click the Apply button to accept the changes made for each individual section.
Click the Delete button to remove the specific entry.

Filter ICMPv6

This window is used to configure filter ICMPv6.
To view this window, click Security > DHCP Server Screening > Filter ICMPv6 as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-58 Filter DHCPv6 Server window
Description
Click to enable or disable filtering DHCPv6 server log.
Click to enable or disable filtering DHCPv6 server trap.
Enter the list of ports to be configured. Select the All Ports check box to configure all
ports.
Use the drop-down menu to enable or disable the filter DHCPv6 server function. The
default is Disabled.
Enter a list of VLANs. When ports are enabled and the VLAN is specified, ingress
DHCPv6 server packets containing the enabled VLAN ID will be checked. Packets
not containing the enabled VLAN ID will be bypassed. When ports are enabled and
the VLAN is not specified, all ingress DHCPv6 server packets will be checked.
Enter the source IPv6 address.
Enter the list of ports to be configured. Select the All Ports check box to configure all
ports.
253