D-Link DGS-3000 Series Reference Manual page 185

Click the Add Rule button to create a new ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following window will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-128)
VLAN Name
VLAN ID
VLAN Mask
Source IP Address
Source IP Address
Mask
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 7-10 Access Rule List window (IPv4 ACL)
Figure 7-11 Add Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to 128.
Auto Assign – Select this check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
Enter the VLAN name.
Enter the VLAN ID.
Select and enter the VLAN mask value.
Enter the source IP address.
Select and enter the source IP address mask.
176