Local Enable Password Settings - D-Link DGS-3000 Series Reference Manual

To view this window, click Security > Access Authentication Control > Accounting Method Lists Settings as
shown below:
The fields that can be configured are described below:
Parameter
Method List Name
Priority 1, 2, 3, 4
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

Local Enable Password Settings

Users can configure the locally enabled password for Enable Admin. When a user chooses the "local_enable" method
to promote user level privileges to administrator privileges, he or she will be prompted to enter the password
configured here that is locally set on the Switch.
To view this window, click Security > Access Authentication Control > Local Enable Password Settings as
shown below:
The fields that can be configured are described below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-70 Accounting Method Lists Settings window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
none - Adding this parameter will require no authentication to access the Switch.
local - Adding this parameter will require the user to be authenticated using the local
user account database on the Switch.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
xtacacs - Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
Figure 8-71 Local Enable Password Settings window
263