D-Link DGS-3000 Series Reference Manual page 292

To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Exclude Address
Settings as shown below:
The fields that can be configured are described below:
Parameter
Begin Address
End Address
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the specific entry.
DHCP Server Pool Settings
This window is used to add and delete the DHCP server pool.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Pool Settings as shown
below:
The fields that can be configured are described below:
Parameter
Pool Name
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Edit button, the following page will appear:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 9-10 DHCP Server Exclude Address Settings window
Description
Enter the starting IP Address.
Enter the ending IP Address.
Figure 9-11 DHCP Server Pool Settings window
Description
Enter the DHCP Server Pool name.
283