Flex Link Settings - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Unicast
Multicast
VLAN Name
VID (1-4094)
MAC Address
Ports
Click the Apply button to accept the changes made.
Click the Clear All button to remove all the entered information in the fields.
Click the Edit button to update the information of the corresponding entry.
Click the Delete button to delete the corresponding entry.

Flex Link Settings

This window is used to configure the Flex Link group, and define a port or the master port in a link aggregation group
as the primary or backup port in the Flex Link group.
To view this window, click L2 Features > Flex Link Settings, as shown below:
The fields that can be configured are described below:
Parameter
Group ID (1-4)
Primary Port
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-109 NLB FDB Settings window
Description
Click to create NLB unicast FDB entry.
Click to NLB multicast FDB entry.
Click the radio button and enter the VLAN of the NLB multicast FDB entry to be
created.
Click the radio button and enter the VLAN by the VLAN ID.
Enter the MAC address of the NLB multicast FDB entry to be created.
Click the ports to be configured. Click the All button to select all ports.
Figure 4-110 Flex Link Settings window
Description
Enter the group ID of the Flex Link.
Select a port to be the primary port in the Flex Link group.
150