The fields that can be configured are described below:
Parameter
HOL Blocking
Prevention State
Click the Apply button to accept the changes made.
Scheduling Settings
QoS Scheduling
This window allows the user to configure the way the Switch will map an incoming packet per port based on its 802.1p
user priority, to one of the eight available hardware priority queues available on the Switch.
To view this window, click QoS > Scheduling Settings > QoS Scheduling as shown below:
The following parameters can be configured:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 6-12 HOL blocking Prevention window
Description
Click the radio buttons to enable or disable the HOL blocking prevention global
setting.
Figure 6-13 QoS Scheduling window
165