Management Settings - D-Link DGS-3000 Series Reference Manual

The fields that can be configured or displayed are described below:
Parameter
Interface Name
IPv6 State
Interface Admin State
IPv6 Network Address
DHCPv6 Client
NS Retransmit Time (0-
4294967295)
Automatic Link Local
Address
Click the Apply button to accept the changes made for each individual section.
Click the <<Back button to discard the changes made and return to the previous page.
Click the View All IPv6 Address
Click the View All IPv6 Address
Click the <<Back button to return to the previous page.

Management Settings

Users can stop the scrolling of multiple pages beyond the limits of the console when using the Command Line
Interface.
This window is also used to enable the DHCP auto-configuration and auto-image feature on the Switch. When auto-
configuration or auto-image is enabled, the Switch is instructed to receive a configuration/image file from a TFTP
server, which will set the Switch to become a DHCP client automatically during the boot-up process. To employ this
method, the DHCP server must be set up to deliver the TFTP server IP address and configuration/image file name
information in the DHCP reply packet. The TFTP server must be up and running and hold the necessary
configuration/image file stored in its base directory when the request is received from the Switch. After the image file
was downloaded, the Switch will reboot.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 3-10 IPv6 Interface Settings window
Description
Display the IPv6 interface name.
Use the drop-down menu to enable or disable IPv6 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Enter the IPv6 global or link-local address.
Use the drop-down menu to enable or disable DHCPv6 client.
Enter the Neighbor solicitation's retransmit timer in milliseconds here. It has the same
value as the RA retransmit time in the config ipv6 nd ra command. If this field is
configured, it will duplicate the entry into the RA field.
Select to enable or disable the Automatic Link Local Address.
link to view all the current IPv6 address.
link to see the following window.
Figure 3-11 IPv6 Interface Settings window
41