D-Link DGS-3000 Series Reference Manual page 290

Match Type
IP Address
String
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Show All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the corresponding entry.
DHCP Relay Option 61 Settings
This window is used to configure, add and delete DHCP relay Option 61 parameters.
To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 61 Settings as
shown below:
The fields that can be configured are described below:
Parameter
DHCP Relay Option
61 Default
Client ID
Relay Rule
Client ID
Click the Apply button to accept the changes made.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Enter the DHCP Relay Option 60 Match Type value.
Exact Match – The Option 60 string in the packet must full match with the specified string.
Partial Match – The Option 60 string in the packet only need partial match with the
specified string.
Enter the DHCP Relay Option 60 IP address.
Enter the DHCP Relay Option 60 String value.
Figure 9-8 DHCP Relay Option 61 Settings window
Description
Select the DHCP Relay Option 61 default action.
Drop – Specify to drop the packet.
Relay – Specify to relay the packet to an IP address. Enter the IP Address of the default
relay server. When there is no matching server found for the packet based on Option 61,
the relay servers will be determined by this default relay server setting.
MAC Address – The client's client-ID which is the hardware address of client.
String – The client's client-ID, which is specified by administrator.
Drop – Specify to drop the packet.
Relay – Specify to relay the packet to an IP address.
MAC Address – The client's client-ID which is the hardware address of client.
String – The client's client-ID, which is specified by administrator.
281