Ssh Authentication Method And Algorithm Settings - D-Link DGS-3000 Series Reference Manual

SSH Authentication Method and Algorithm Settings

Users can configure the desired types of SSH algorithms used for authentication encryption. There are three
categories of algorithms listed and specific algorithms of each may be enabled or disabled by selecting their
corresponding check boxes. All algorithms are enabled by default.
To view this window, click Security > SSH > SSH Authentication method and Algorithm Settings as shown below:
The fields that can be configured for SSH Authentication Mode are described below:
Parameter
Password
Public Key
Host-based
Click the Apply button to accept the changes made.
The fields that can be configured for the Encryption Algorithm are described below:
Parameter
3DES-CBC
AES128-CBC
AES192-CBC
AES256-CBC
Cast128-CBC
ARC4
Blow-fish CBC
Twofish128
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-74 SSH Authentication Method and Algorithm Settings window
Description
This may be enabled or disabled to choose if the administrator wishes to use a locally
configured password for authentication on the Switch. This parameter is enabled by
default.
This may be enabled or disabled to choose if the administrator wishes to use a public
key configuration set on a SSH server, for authentication. This parameter is enabled
by default.
This may be enabled or disabled to choose if the administrator wishes to use a host
computer for authentication. This parameter is intended for Linux users requiring SSH
authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. This parameter is enabled by default.
Description
Use the check box to enable or disable the Triple Data Encryption Standard
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES256
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Arcfour encryption algorithm. The default is
enabled.
Use the check box to enable or disable the Blowfish encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the twofish128 encryption algorithm. The
268