Compound Authentication Guest Vlan Settings; Port Security; Port Security Settings - D-Link DGS-3000 Series Reference Manual

Authorized Mode
Click the Apply button to accept the changes made for each individual section.

Compound Authentication Guest VLAN Settings

Users can assign ports to or remove ports from a guest VLAN.
To view this window, click Security > Compound Authentication > Compound Authentication Guest VLAN
Settings as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID (1-4094)
Port List
Action
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Port Security

Port Security Settings

A given port's (or a range of ports') dynamic MAC address learning can be locked such that the current source MAC
addresses entered into the MAC address forwarding table cannot be changed once the port lock is enabled. The port
can be locked by changing the Admin State drop-down menu to Enabled and clicking Apply.
Port Security is a security feature that prevents unauthorized computers (with source MAC addresses) unknown to the
Switch prior to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the
network.
To view this window, click Security > Port Security > Port Security Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
authentication methods need to be passed.
Toggle between Host-based and Port-based. When Port-based is selected, if
one of the attached hosts passes the authentication, all hosts on the same port
will be granted access to the network. If the user fails the authorization, this port
will keep trying the next authentication method. When Host-based is selected,
users are authenticated individually.
Figure 8-46 Compound Authentication Guest VLAN Settings window
Description
Click the button and assign a VLAN as a Guest VLAN. The VLAN must be an existing
static VLAN.
Click the button and assign a VLAN ID for a Guest VLAN. The VLAN must be an
existing static VLAN before this VID can be configured.
Enter the list of ports to be configured. Select the All Ports check box to set every port
at once.
Use the drop-down menu to choose the desired operation: Create VLAN, Add Ports, or
Delete Ports.
242