Specifying The Com Port - Emerson Rosemount 5400 Series Reference Manual

Reference Manual
00809-0100-4026, Rev HA
5.4.4

Specifying the COM port

If communication is not established, open the Communication Preferences window and check
that the correct COM Port is selected:
1.
Figure 5-9. Communication Settings
2.
3.
4.
Basic Configuration/Start-up
From the View menu, select Communication Preferences in RRM.
Make sure that HART communication is enabled.
Check which COM port is connected to the modem.
Select the COM port option matching the actual COM port on the PC that is connected
to the transmitter.
Section 5: Basic Configuration/Start-up
November 2014
87