5Section 5: Basic Configuration/Start-Up; Overview; Basic Configuration Parameters; Configuration Tools - Emerson Rosemount 5400 Series Reference Manual

Section 5: Basic Configuration/Start-up
November 2014
5.2

Overview

The configuration of a Rosemount 5400 Series transmitter is normally a simple and straightfor-
ward task. If the transmitter is pre-configured at the factory according to ordering specifications
in the Configuration Data Sheet, no further basic configuration is required, unless tank
conditions have changed.
The Rosemount 5400 Series supports a set of advanced configuration options that can be used
to handle special tank conditions and applications. For further information on advanced
configuration options, see
5.2.1

Basic configuration parameters

The basic configuration includes parameters for a standard configuration which is sufficient in
most cases. The basic configuration comprises the following items:
„
„
„
„
5.2.2

Configuration tools

There are several tools available for basic configuration of a Rosemount 5400 Series transmitter:
„
„
„
„
„
„
RRM is a user-friendly, Windows
offline/online configuration Wizard, logging, and extensive online help.
74
Appendix C: Advanced
Measurement Units
Tank Configuration
- Tank Geometry
- Environment
- Volume
Analog Output
Echo Tuning: see page 83
(ATC), and "Echo tuning" on page 83
RRM. Note that RRM is required for advanced configuration features.
See "Basic configuration using RRM" on page 84
configure the Rosemount 5400 Series.
Rosemount Field Communicator.
See "Configuration using a Field Communicator" on page 101
Communicator Menu Tree.
DTM (compliant with version 1.2 of the FDT
supporting configuration in, for instance, Yokogawa Fieldmate/PRM, E+H
TM
and PACTware
®
AMS Suite software (for HART).
See "Basic configuration using AMS Suite" on page 105
AMS Suite.
TM
DeltaV (only for F
OUNDATION
See "Configuration using DeltaV" on page 106
Rosemount 5400 Series transmitter using DeltaV.
Other tools that support EDDL functionality.
Configuration.
for more information on the Amplitude Threshold Curve
for more information on False Echo Registration
®
/DTM™ specification) is also available
™ fieldbus).
™
based software package that includes waveform plots,
Reference Manual
00809-0100-4026, Rev HA
for information on using RRM to
for the Field
for information on configuring
for information on configuring the
Basic Configuration/Start-up
TM
FieldCare,