Section 3: Mechanical Installation
November 2014
3.3.2
Special considerations in solids applications
Figure 3-4. Transmitter Location in Solids Applications
Figure 3-5. Install the Transmitter with a Clear and Unobstructed View
24
The transmitter should be mounted as close to the center of the tank as possible, but
not in the center of the tank. A general practice is to mount the transmitter at
radius from the tank wall, see
The radar signal must never be shaded by the inlet nor the injected product, see
Figure 3-5.
Figure
3-4.
Reference Manual
00809-0100-4026, Rev HA
2
/
tank
3
Mechanical Installation