Reference Manual
00809-0100-4026, Rev HA
B.2
European Directive information
The EC declaration of conformity for all applicable European directives for this product can be
found on the Rosemount website at www.rosemount.com.
A hard copy may be obtained by contacting our local sales representative.
B.3
FCC and ICC
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications to this equipment not expressly approved by Rosemount Inc.
may void the FCC authorization to operate this equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Les changements ou les modifications apportés à l'équipement qui n'est pas expressément
approuvé par Rosemount Inc pourraient annuler l'autorité de l'utilisateur à utiliser cet
équipement.
B.4
Safety Instrumented Systems (SIS)
The Rosemount 5400 Series has been evaluated by a third party, the SP (Technical Research
Institute of Sweden), against hardware requirements according to IEC 61508. With a FMEDA
(Failure Modes, Effects and Diagnostics Analysis) report with a Safe Failure Fraction (SFF) above
80%, 5400 is suitable in SIS according to the Prior Use methodology. For more information, go
to: http://www.rosemount.com/safety. To order the certificate of FMEDA data, use option code
QS.
(1)
Not available for solids applications.
Product Certifications
Appendix B: Product certifications
(1)
November 2014
219