Section 7: Service and Troubleshooting
November 2014
7.11
Surface search
The Surface Search command triggers a search for the product surface and can be used, for
example, if the measured level is locked onto a disturbing object in the tank (see
report" on page
AMS and DeltaV
1.
Search for Surface
2.
150
147).
In the AMS and DeltaV explorer select Configure/Manual setup, choose the Echo
Tuning tab, and select Search for Surface.
Choose the Surface Search option.
Reference Manual
00809-0100-4026, Rev HA
"Configuration
Service and Troubleshooting