Reference Manual
00809-0100-4026, Rev HA
5.7
Basic configuration using AMS Suite
The Rosemount 5400 Series transmitter can be configured using the AMS Suite software:
Basic Configuration/Start-up
Section 5: Basic Configuration/Start-up
1. Start the AMS Device Manager making sure the
transmitter is connected. The transmitter is
displayed in the Device Connection View window
(pictures correspond to AMS
version 9.0).
2. In the Device Connection View, right click the
transmitter icon.
3. Select the Configure option.
4. Select the Guided Setup option.
5. Configure the transmitter by selecting the
appropriate buttons. For information on the
various configuration parameters, see
configuration parameters" on page 75
November 2014
"Basic
.
105