Installation Manual
MMI-20029969
9
Available service port connection
Use the service port connection to download or upload data from/to the transmitter.
To access the service port, use:
•
Any commonly-available USB drive
Note
The USB drive must be in FAT format. The transmitter does not recognize NTFS format.
•
The standard USB cable provided by Micro Motion to connect the 5700 transmitter to
the PC
If the transmitter is in a hazardous area, do not remove the housing cover while the
transmitter is powered up. Failure to follow these instructions can cause an explosion
resulting in injury or death.
The service port connection is located under the Service Port warning flap at the wiring
access points.
Installation Manual
WARNING
Available service port connection
October 2022
45