Emerson Rosemount 5400 Series Reference Manual page 101

Reference Manual
00809-0100-4026, Rev HA
Getting started
1.
2.
3.
4.
5.
Basic Configuration/Start-up
Before starting RRM make sure that appropriate settings are made with the National
Instruments Interface Configuration Utility:
Use the following settings:
Device address = Visitor
Device Type = Link Master Device
Usage = NI-FBUS
Start RRM: from the Start menu click Programs > Rosemount > Rosemount
RadarMaster or click the RRM icon in the Microsoft Windows workspace.
If the National Instruments Communication Manager server is not running, click Yes when
RRM displays a request for starting the server.
If the Search Device window did not appear automatically, select menu option Device >
Search.
In the Search Device window, select communication protocol F
not already selected) and click the Start Scan button (click the Advanced button if you
want to specify start and stop dress).
Now RRM searches for the transmitter. After a while, RRM shows the transmitters found
on the bus:
Section 5: Basic Configuration/Start-up
OUNDATION
November 2014
fieldbus (if
89