Engineered Solutions; Tank Connection And Antennas; A.3.3 Engineered Solutions - Emerson Rosemount 5400 Series Reference Manual

Appendix A: Reference data
November 2014
A.3.3

Engineered solutions

When standard model codes are not sufficient to fulfill requirements, please consult the factory
to explore possible Engineered Solutions. This is typically, but not exclusively, related to the
choice of wetted materials or the design of a process connection. These Engineered Solutions
are part of the expanded offerings and may be subject to additional delivery lead time. For
ordering, factory will supply a special R-labeled numeric option code that should be added at
the end of the standard model string. See example model string below.
Example Model String: 5402-A-H-1-E5-45-PV-CA-M1C1-R1234
A.3.4

Tank connection and antennas

Tank connection
The tank connection consists of a tank seal, a flange, Tri-Clamp™, or NPT thread.
Certain models of tank connections have a tank connection design with a protective plate of the
same material as the antenna. This is to prevent the 316L / EN1.4404 stainless steel flange from
being exposed to the tank atmosphere. See
on page
Flange dimensions
Follows ASME B16.5, JIS B2220, and EN 1092-1 standards. For more information, see
flanges" on page
Antennas
Cone, Process Seal, and Rod Antenna. Cone antennas can be ordered in different materials.
Extended cone antennas are available in SST 316L.
5402 Cone Antenna
„
„
„
„
5402 Process Seal Antenna
„
„
5401 Cone Antenna
„
„
5401 Rod Antenna
„
„
196
200.
205.
Suitable for stilling-well/bridle installation
Can be recessed in smooth nozzles
Cone extensions are available
Suitable for solids applications (only 4 inch cone antenna)
Ideal for small tanks and corrosive applications
Suitable for applications with heavy condensation/build-up
Suitable for applications with heavy condensation/build-up
Cone extensions are available
Suitable for small process connections and corrosive environments
Two versions: all PFA and PFA+SST
"Dimensional drawings and mechanical properties"
Reference Manual
00809-0100-4026, Rev HA
"Standard
Reference Data