Table 6.3 Error Messages - ILX Lightwave LDX-36000 Series User Manual

6
C H A P T E R

Table 6.3 Error Messages

Error Code
E-001
E-103
E-104
E-105
E-106
E-124
E-126
E-201
E-202
E-203
E-205
E-207
E-210
E-211
E-213
E-214
E-301
E-302
E-501
E-502
E-503
E-504
E-505
E-506
E-509
E-511
E-525
E-526
E-527
E-528
E550
E-599
136
 LDX-36000 Series
C A L I B R A T I O N A N D T R O U B L E S H O O T I N G
Error Messages
Error Message
Memory allocation failure.
<DEFINITE LENGTH ARBITRARY BLOCK DIAGRAM DATA> length too long.
<NON-DECIMAL NUMERIC PROGRAM DATA> type not defined.
<DECIMAL PROGRAM DATA> exponent not valid.
<DECIMAL PROGRAM DATA> digit expected.
<PROGRAM MNEMONIC> Lookup, failed because query/command type match failed.
Too few or too many program data elements.
<PROGRAM DATA> value out of range.
<PROGRAM DATA> will not convert to valid type.
Security violation, command is not available without clearance.
<PROGRAM DATA> is not a Boolean value or word.
<PROGRAM DATA> will not convert to an unsigned 16-bit value.
<PROGRAM DATA> will not convert to a floating point value.
<PROGRAM DATA> will not convert to a character value.
<PROGRAM DATA> is incorrect block data length.
<PROGRAM DATA> length exceeds maximum.
A <RESPONSE MESSAGE> was ready, but controller failed to read it. (query error)
Query error. Device was addressed to talk, but controller failed to read all of the
<RESPONSE MESSAGE>.
Laser interlock #1 disabled output.
Laser interlock #2 disabled output.
High impedance condition.
Laser current limit disabled output.
Laser voltage limit disabled output.
AC power failure
Laser output disabled because of High Temperature Limit condition.
Laser control (unknown) error disabled output.
Open temperature sensor error.
Shorted temperature sensor error.
Power supply failure.
Power supply voltage limit.
Pass element power limit
Laser open circuit 2.