ILX Lightwave LDX-36000 Series User Manual page 119

LASer:LDI <nrf value>
Action
Parameters
Examples
LASer:LDI?
Action
Parameters
Notes
Examples
LASer:LDV? <nrf value>
Action
Parameters
Notes
Expamples
03_10
Sets the output current setpoint.
One <nrf value> specifying the output current in Amps.
"LAS:LDI 4.5" -action: sets output current setpoint to 4.5 A.
"las:LDI 7.2" -action: sets output current to 7.2 A.
Returns the output current setpoint.
None.
The LAS:LDI? query does not return a measurement as is done with other ILX Lightwave
instruments. It returns a value of the setpoint only.
"LAS:LDI?" -response: "4.5", means the output current setpoint is 4.5 A.
"las:LDI?" -response: "7.2", means the output current setpoint is 7.2 A.
Returns the laser forward voltage measurement in Volts.
None.
This measurement is updated approximately once every 600 ms in CW mode and every
pulse in QCW mode.
"las:ldv?" - response: "2.75", means the measured laser forward voltage is 2.75 V.
C O M M A N D R E F E R E N C E
Command Reference
5
C H A P T E R
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
103
LDX-36000 Series
