ILX Lightwave LDX-36000 Series User Manual page 115

LASer:ENABle:OUTOFF?
Action
Parameters
Notes
Examples
03_10
Returns the value of the Output Off Enable Register.
None.
The response is the sum of the enabled bits and must be a value between 0 and 65535
as detailed below.
1 Laser Current Limit
*2 Laser Voltage Limit
4 High Temperature Limit
*8 Laser Open Circuit
*16 Interlock #1 Open
*32 Interlock #2 Open
64 Temp Sensor Open
128 Temp Sensor Shorted
The enabled or disabled events can be set via the LASer:ENABle:OUTOFF command.
The output status can be monitored by using the LASer:EVEnt? query.
The factory default value for this register is #B1111110000111110, or #HFC3E, or 64574
decimal.
Bits marked by asterisks (*) are permanently enabled and cannot be changed.
Bits marked with a dagger (
"LAS:ENAB:OUTOFF?" -response: "1086" means, that either the laser voltage limit,
high temperature limit, laser open circuit, the opening of interlocks #1 or #2, or the
hardware current limit will force the laser output off.
C O M M A N D R E F E R E N C E
Command Reference
†
256 Output On
512 Bad Steinhart-Hart Conversion
*1024 Hardware Current Limit
2048 * AC Power Failure
*4096 Laser Open Circuit 2
*8192 Power Supply Failure
*16384 Power Supply Voltage Limit
*32768 Pass Element Power Limit
†
) are permanently disabled and cannot be changed.
5
C H A P T E R
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
99
LDX-36000 Series
