ILX Lightwave LDX-36000 Series User Manual page 131

*OPC?
-Operation Complete Query
Action
Parameters
Notes
Examples
*PSC <nrf value>
-Power-On Status Clear
Action
Parameters
Notes
Examples
*PSC?
-Power-On Status Clear Query
Action
Parameters
Notes
Examples
03_10
Places an ASCII character 1 into the instrument's Output Queue when all pending
operations have been finished.
None.
See the IEEE 488.2 specification for additional information.
*OPC? -response: "1" when all overlapped commands are complete.
Sets automatic power-on clearing of the enable registers.
One <nrf value> where 0 = disables power-on clearing and 1 = enables power-on
clearing.
Registers affected:
Condition Status Enable
Event Status Enable
Factory default condition: Disabled
In the disabled state, the values of the enable registers are saved through power
OFF/ON. The power-on status clear flag (see *PSC?) is set false, disallowing service
request interrupts after power-on.
In the enabled state, the enable registers are cleared during power-on. The power-on
status clear flag (see *PSC?) is set true, allowing service request interrupts after power-
on.
*PSC 0 Disable automatic power-on clearing of the enable registers.
*PSC 1 Enable automatic power-on clearing of the enable registers.
Requests the status of the power-on status clear flag.
None.
Response: 0 - The enable registers are saved through power off/on.
1 - The enable registers are cleared during power on.
Registers affected:
Condition Status Enable
Event Status Enable
See Chapter Four for more information on register structure.
*PSC? Request state of power-on status clear flag.
C O M M A N D R E F E R E N C E
Command Reference
Service Request Enable
Standard Event Status Enable
Service Request Enable
Standard Event Status Enable
5
C H A P T E R
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
115
LDX-36000 Series
