ILX Lightwave LDX-36000 Series User Manual page 102

5
C H A P T E R
LASer:DELAYIN <nrf value>
Action
Parameters
Notes
Examples
LASer:DELAYIN?
Action
Parameters
Notes
Examples
86
 LDX-36000 Series
C O M M A N D R E F E R E N C E
Command Reference
Configures the delay, in seconds, between an input trigger pulse and the rising edge of
the output current pulse.
One <nrf value>, representing the delay in seconds with a range of 20x10
1 second with a resolution of 1 µs.
The default value is 20 µs.
The delay between input trigger and output pulse, along with the input trigger itself are
only enabled when the instrument is in QCW-Trig mode.
Refer to Figure 3.17 for a QCW timing diagram illustrating the relationship between input
and output pulses.
"LAS:DELAYIN 135e-6" -action: Sets a delay of 135 µs between the rising edge of the
input trigger and the output current pulse.
Returns the delay, in seconds, between an input trigger pulse and the rising edge of the
output current pulse.
None.
The default value is 0 seconds.
"LAS:DELAYIN?" -response: "2.5e-3", means the delay between an input trigger and
output current pulse will be 2.5 ms.
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
-6
s (20 µs) to
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT