ILX Lightwave LDX-36000 Series User Manual page 107

LASer:DISplay:Power?
Action
Parameters
Notes
Examples
LASer:DISplay:PPD
Action
Parameters
Notes
LASer:DISplay:PPD?
Action
Parameters
Notes
Examples
03_10
Returns the status of the power setpoint display.
None.
In local operation, ths status of the P button is indicated by the annunciator to the right of
Display 1 (W will be illuminated when the display is in P mode).
"LAS:DIS:P?" -response: 0, means that the power display is not currently active, output
optical power is not being shown on Display 1.
"LAS:DIs:p?" -response: 1, means that the power display is currently active, output
optical power is shown on Display 1.
Sets Display 1 to show measured output power from external photodiode.
None.
Display will show measured photocurrent in Amps unless a nonzero value for
responsivity has been entered via the front panel or the LAS:CALPD command. When a
nonzero responsivity has been entered, display will indicate optical power in Watts with a
second annunciator PD being illuminated to indicate this is a photodiode measurement.
The output power display is automatically turned off when another display section is
enabled.
Returns the status of thephotodiode power measurement display.
None.
In local operation, the status of the PPD button is indicated by annunciators to the right of
Display 1 (W and PD will be illuminated when the display is in PPD mode).
"LAS:DIS:PPD?" -response: 0, means that the photodiode power measurement display
is not currently active; measured optical power or photocurrent is not being shown on
Display 1.
"LAS:DIS":PPD?" -response: 1, means that the photodiode power measurement display
is currently active; measured optical power or photocurrent is shown on Display 1.
C O M M A N D R E F E R E N C E
Command Reference
5
C H A P T E R
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
91
LDX-36000 Series
