ILX Lightwave LDX-36000 Series User Manual page 105

LASer:DISplay:Frequency?
Action
Parameters
Notes
Examples
LASer:DISplay:LDI
Action
Parameters
Notes
Examples
LASer:DISplay:LDI?
Action
Parameters
Notes
Examples
03_10
Returns the status of the frequency display.
None.
In local operation, the status of the f button is indicated by the annunciator to the right of
Display 2 (Hz will be illuminated when the display is in duty cycle mode).
"LAS:DIS:DC?" -response: 0, means that the frequency button f is not currently active,
frequency is not being shown on Display 2.
"LAS:DIS:DC?" -response: 1, means that the frequency button f is currently active,
frequency is shown on Display 2.
Sets Display 1 to show output current setpoint.
None.
The output current setpoint display is automatically turned off when another display
selection is enabled.
"LAS:DIS:LDI" -action: enables the output current setpoint display on Display 1.
Returns the status of the output current setpoint display.
None.
In local operation, the status of the I button is indicated by the annunciator to the right of
Display 1 (A will be illuminated when the display is in I mode).
"LAS:DIS:LDI?" -response: 0, means that the output current button I is not currently
active, current setpoint is not being shown on Display 1.
"LAS:DIS:LDI?" -response: 1, means that the output current button I is currently active,
current setpoint is shown on Display 1.
C O M M A N D R E F E R E N C E
Command Reference
5
C H A P T E R
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
89
LDX-36000 Series
