ILX Lightwave LDX-36000 Series User Manual page 130

5
C H A P T E R
MESsage <ASCII string>
Action
Parameters
Notes
Examples
MESsage?
Action
Parameters
Notes
Examples
*OPC
-Operation Complete
Action
Parameters
Notes
Examples
114
 LDX-36000 Series
C O M M A N D R E F E R E N C E
Command Reference
Allows entry of an ASCII string of up to 16 non-zero characters. This command may be
useful for storing messages which relate to a test or configuration.
ASCII string with up to 16 non-zero characters in length.
The message may contain any ASCII character, but will be terminated when a NULL
terminator character is received. If the message has less than 16 bytes, the firmware will
fill the remaining message space with the space character. After 16 bytes have been
entered, the firmware will null-terminate the string.
"Mes "THIS IS A TEST."" -action: The string "THIS IS A TEST. " will be stored in non-
volatile memory.
"MES "Test 3"" -action: The string "Test 3
Returns a previously stored message from non-volatile memory. The message will
always be 16-bytes in length and enclosed in quotes. The message is entered via the
MESsage command.
None.
The response data will be a 16-byte long string. If there is no previously stored
message, the response will be "
"MES?" -response: "Test 3
"MES?" -response: "THIS IS A TEST. ", means the previously stored message was
"THIS IS A TEST."
Sets the Operation Complete Bit in the Event Status Register when all pending
overlapped commands have been completed.
None.
See the IEEE 488.2 specification for additional information.
*OPC
" will be stored in non-volatile memory.
", all spaces.
", means the previously stored message was "Test 3".
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT
C
OMMON
F P
RONT ANEL
D D
EVICE EPENDENT