ILX Lightwave LDX-36000 Series User Manual page 84

5
C H A P T E R
Table 5.1 Remote Command Summary Reference List (Continued) (Sheet 3 of 5)
Name
LAS:DIS:P
LAS:DIS:P?
LAS:DIS:PPD
LAS:DIS:PPD?
LAS:DIS:PWF
LAS:DIS:PWF?
LAS:DIS:PWP
LAS:DIS:PWP?
LAS:DIS:T
LAS:DIS:T?
LAS:ENAB:COND
LAS:ENAB:COND?
LAS:ENAB:EVE
LAS:ENAB:EVE?
LAS:ENAB:OUTOFF
LAS:ENAB:OUTOFF?
LAS:EVE?
LAS:F
LAS:F?
LAS:INC
LAS:IPD?
LAS:LDI
LAS:LDI?
LAS:LDV?
LAS:LIM:I
LAS:LIM:I?
LAS:LIM:T
68
 LDX-36000 Series
C O M M A N D R E F E R E N C E
Remote Command Reference Summary
Parameters Function
NONE Turns on Display 1 to show laser output current in terms of
optical output power. Must have previously entered laser
threshold and slope efficiency (LAS:CALP) for this command
to function.
NONE Returns on/off status of the laser optical output power
display.
NONE Turns on Display 1 to show measured optical power or
photocurrent from external photodiode.
NONE Returns on/off status of the external photodiode display.
NONE Turns on Display 2 to show pulsewidth setpoint when in
constant frequency mode.
NONE Returns on/off status of the pulsewidth (constant frequency)
display.
NONE Turns on Display 2 to show pulsewidth setpoint when in
constant duty cycle mode.
NONE Returns on/off status of the pulsewidth (constant duty cycle)
display.
NONE Turns on Display 2 to show measured temperature.
NONE Returns on/off status of temperature display.
1 Sets the Laser Condition Status Enable Register.
NONE Returns the value of the Laser Condition Status Enable
Register.
1 Sets the Laser Event Status Enable Register.
NONE Returns the value of the Laser Event Status Enable Register.
1 Sets the Laser Output Off Enable Register.
NONE Returns the value of the Laser Output Off Enable Register.
NONE Returns the value of the Laser Event Status Register.
1 Specifies the frequency to be used in QCW mode.
NONE Returns the QCW mode frequency setpoint.
2 Increases the laser current setpoint value by one or more
steps.
NONE Returns the measured external photodiode photocurrent
1 Specifies the laser current source setpoint value.
NONE Returns the laser current source setpoint value.
NONE Returns the measured laser voltage value.
1 Sets the laser current source limit.
NONE Returns the laser current source limit.
1 Sets the laser high temperature limit.