Environmental Conditions; Obligations Of The Operator; Obligations Of Personnel; Mains Connection - Fronius TPS/i Robotics PushPull CMT Operating Instructions Manual

Environmental Operation or storage of the device outside the stipulated area will be deemed as not in ac-
conditions cordance with the intended purpose. The manufacturer shall not be held liable for any dam-
age arising from such usage.
Ambient temperature range:
-
-
Relative humidity:
-
-
The surrounding air must be free from dust, acids, corrosive gases or substances, etc.
Can be used at altitudes of up to 2000 m (6561 ft. 8.16 in.)
Obligations of the The operator must only allow persons to work with the device who:
operator -
-
-
Checks must be carried out at regular intervals to ensure that operators are working in a
safety-conscious manner.
Obligations of Before using the device, all persons instructed to do so undertake:
personnel -
-
Before leaving the workplace, ensure that people or property cannot come to any harm in
your absence.

Mains connection

Devices with a higher rating may affect the energy quality of the mains due to their current
consumption.
This may affect a number of types of device in terms of:
-
-
-
*)
see Technical Data
In this case, the plant operator or the person using the device should check whether the
device may be connected, where appropriate by discussing the matter with the power sup-
ply company.
10
during operation: -10 °C to + 40 °C (14 °F to 104 °F)
during transport and storage: -20 °C to +55 °C (-4 °F to 131 °F)
up to 50% at 40 °C (104 °F)
up to 90% at 20 °C (68 °F)
are familiar with the fundamental instructions regarding safety at work and accident
prevention and have been instructed in how to use the device
have read and understood these operating instructions, especially the section "safety
rules", and have confirmed as much with their signatures
are trained to produce the required results.
to observe the basic instructions regarding safety at work and accident prevention
to read these operating instructions, especially the "Safety rules" section and sign to
confirm that they have understood them and will follow them.
connection restrictions
criteria with regard to the maximum permissible mains impedance
criteria with regard to the minimum short-circuit power requirement
at the interface with the public grid
NOTE! Ensure that the mains connection is earthed properly
*)
*)