Splitbox Sb 60I R; Device Concept; Proper Use; Safety - Fronius TPS/i Robotics PushPull CMT Operating Instructions Manual

SplitBox SB 60i R

Device concept

The SB 60i R and SB 60i R/L are devices for bringing together the welding media in auto-
mated MIG/MAG welding and are specially designed for mounting on robots.
SB 60i R
SB 60i R /L .... Left version of the appliance, for fitting to the left side of the robot

Proper use

The device is designed exclusively for bringing together the welding media in automated
MIG/MAG welding applications in conjunction with Fronius system components. Any use
above and beyond this purpose is deemed improper. The manufacturer shall not be held
liable for any damage arising from such usage.
Utilisation in accordance with the intended purpose also comprises:
-
-
-

Safety

.... Right version of the appliance, for fitting to the right side of the robot
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
performing all the stipulated inspection and maintenance work
WARNING! Incorrect operation or shoddy workmanship can cause serious injury
or damage. All work described in this document must only be carried out by
trained and qualified personnel. All functions described in this document must
only be used by trained and qualified personnel. Do not carry out any of the work
or use any of the functions described until you have fully read and understood the
following documents:
- this document
- all the operating instructions for the system components, especially the safe-
ty rules
33