Pushpull Hosepack; General; Scope Of Supply - Fronius TPS/i Robotics PushPull CMT Operating Instructions Manual

PushPull hosepack

General

The Robacta MHPi RD hosepack is designed for gas-cooled and water-cooled robot appli-
cations. It connects the SplitBox to the wirefeeder.
The length of the hosepack depends on the robot.
The following combinations are available:
-
-
-

Scope of supply

Robacta MHPi RD conventional hosepack
Robacta MHPi RD hosepack with external wirefeeding
hose
Robacta MHPi RD conventional
- SB500i -> WF 25i Robacta Drive
- SB60i -> WF 60i Robacta Drive CMT
Robacta MHPi RD PAP
- SB500i -> WF 25i Robacta Drive
- SB500i -> WF 60i Robacta Drive CMT
- SB60i -> WF 60i Robacta Drive CMT
Robacta MHPi RD conventional with external wirefeeding hose
- SB500i -> WF 25i Robacta Drive
- SB500i -> WF 60i Robacta Drive CMT
Robacta MHPi RD PAP hosepack
Not supplied:
- Inner liners
- Inlet nozzles
35