Software Control Modes; Pecial Functions . 28 - Lightware HDMI-3D-OPT-TX210RAK User Manual
Hide thumbs
Also See for HDMI-3D-OPT-TX210RAK:
- Quick start manual (2 pages) ,
- User manual (97 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
5.2. Software control modes
User has more possibilities to control the device besides the front panel buttons. The
following list contains the software control modes:
▪
▪
▪
Operation
Lightware Device Controller (LDC) - you can connect to the device via our control
software with using USB, RS-232 or Ethernet (only with SW4-OPT-TX240RAK
model) interfaces and control or configure the device as you wish. For the details
see section
6
on page 30.
LW2 protocol commands: you can configure the device with reduced command set with
our built-in command protocol LW2. For more details see section
LW3 protocol commands: you can also configure the device with the full-range command
set our built-in command protocol LW3. For more details see section
HDMI-3D-OPT-TX200 series
User's manual
7
on page 49.
8
on page 62.
Page 29 / 106
Advertisement
Table of Contents
Need help?
Do you have a question about the HDMI-3D-OPT-TX210RAK and is the answer not in the manual?
Questions and answers