2
PARAMETER SETTINGS
Set the parameters of each channel.
Setting parameters here eliminates the need to program them.
2.1
Basic Setting
Setting method
Open "Basic setting" of the engineering tool.
1.
Start Module Parameter.
[Navigation window] [Parameter] [Module Information] Module model name [Basic setting]
2.
Click the item to be changed to enter the setting value.
• Item where a value is selected from the drop-down list
Click the [] button of the item to be set, and select the value from the drop-down list that appears.
• Item where a value is entered into the text box
Double-click the item to be set to enter the numeric value.
2 PARAMETER SETTINGS
54
2.1 Basic Setting