Connection Settings - Mitsubishi Electric Melsec iQ-R Series User Manual

3.4

Connection Settings

Set the method to connect between a personal computer and the A/D converter module. The settings are configured in the
M_CommDTM-HART configuration window.
Window structure
The following shows the window structure of M_CommDTM-HART.
(4) (1)
No. Item name
(1) Select transfer setup
(2) Configure
(3) Comm. Test
(4) Starting I/O Number
(5) Read from PLC
(6) Setting details
(7) Cancel
(8) OK
(5)
(6) (7)
Description
Selects a connection path to the control CPU of the registered A/D converter module. This item is also
used to create a new connection path or delete or change a connection path.
■Setting details
• iQ-Rn USB
• <New...>
• <Rename/Remove...>
Changes connection path settings.
Tests a communication of the connection path selected in "Select transfer setup".
Sets the start I/O number of the A/D converter module.
Reads the start I/O number of the A/D converter module from the connected CPU module.
Displays the details of the set connection path. Displays the window for changing the setting by clicking
the displayed window.
Closes the M_CommDTM-HART configuration window without reflecting the configured settings.
Closes the M_CommDTM-HART configuration window with reflecting the configured settings into the
project.
(2) (3)
(8)
3 CommDTM
61
3.4 Connection Settings
3