Mitsubishi Electric Melsec iQ-R Series User Manual page 155

7.
Set "Refresh Setting" of "Module Parameter" of the A/D converter module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [R60ADI8-HA]  [Refresh settings]
8.
Write the set parameters to the remote head module on the intelligent device station. Then reset the remote head
module or power off and on the system.
[Online]  [Write to PLC]
For parameters of the remote head module which are not described in this procedure, set default values. For
details on parameters of the remote head module, refer to the following.
 MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's Manual (Application)
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
153