Creating A Project - Mitsubishi Electric Melsec iQ-R Series User Manual

3.3

Creating a Project

Create a project in FDC and add M_CommDTM-HART to the FDC project.
1.
Start FDC.
2.
Click [Update] in "DTM catalog". Check that M_CommDTM-HART and Device DTM are registered in "DTM catalog".
3.
Create a new project.
[Project]  [New]
4.
Enter a project name in the "New project" window and click [OK].
5.
Add M_CommDTM-HART to the project.
[Project view]  [MyNetwork]  Right-click  [Add DTM]
6.
Select M_CommDTM-HART from the displayed DTM catalog and click [OK].
3 CommDTM
60
3.3 Creating a Project