9.1.6
Protective conductor connection and shield support
It is always advisable to shield the digital I/O wiring.
The following figure shows typical Weidmüller shield connection clamps for the shield
supports.
Figure 9-5
Weidmüller website address: http://www.weidmueller.com
If the shielding procedures described and the specified cable lengths are not observed, the
machine may not operate properly.
NOTICE
Only use screws with a permissible mounting depth of 4 - 6 mm.
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0
Shield supports and protective conductor connection
DANGER
Additional system components
9.1 Terminal Module TM54F
193