Mounting On The Mounting Surface - Siemens SINAMICS S120 Manual

Control Units and operating elements
4.5 Mounting Control Units
4.5.2

Mounting on the mounting surface

Mounting a CU320-2 Control Unit directly onto a mounting surface
Mount the fixing lug of the Control Unit on the mounting surface using M6 screws.
Tightening torque: 6 Nm (53.1 lbf in)
Mounting a CU320-2 Control Unit to a mounting surface using spacers
To increase the overall depth of the Control Unit to the 270 mm overall depth of a booksize Line
Module, mount the spacers (2 spacers: 6SL3064-1BB00-0AA0) as shown below to the Control
Unit.
Tools required:
• Torx screwdriver T10 for the screws (M3) of the spacer
①
Figure 4-17
88
Spacer
CU320-2 with spacers for mounting on a mounting surface
1
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2