Table of Contents
Advertisement
Installation and Configuration
Safety Information
This equipment contains voltage hazardous to human life and safety, and is
capable of inflicting personal injury.
- Chassis Grounding—The chassis requires a connection from the premise wire
- Live Circuits—Operating personnel and service personnel must not remove
- Explosive Atmosphere—Do not operate the chassis in conditions where
- Part Replacement—Only service this equipment with parts that are exact
- Modification—Do not modify any part of the chassis from its original condition.
Chassis Cooling Considerations
The M9005A chassis is designed to operate on a bench or in an instrument rack.
Determine how you want to use the chassis and follow the appropriate
installation instructions.
14
Before undertaking any troubleshooting, maintenance, or
exploratory procedure, carefully read the following caution
notices.
safety ground to the chassis ground. The earth safety ground must be
connected during use of this equipment to minimize shock hazards. Refer to
"Connecting Safety Ground"
ground.
protective covers when operating or servicing the chassis. Adjustments and
service to internal components must be undertaken by qualified service
technicians. During service of this product, the mains connector to the
premise wiring must be disconnected. Dangerous voltages may be present
under certain conditions; use extreme caution.
flammable gases are present. Under such conditions, this equipment is unsafe
and may ignite the gases or gas fumes.
replacements, both electrically and mechanically. Contact Keysight for
replacement part information. Installation of parts with those that are not
direct replacements may cause harm to personnel operating the chassis.
Furthermore, damage or fire may occur if replacement parts are unsuitable.
Unsuitable modifications may result in safety hazards.
on page 17 for instructions on connecting safety
Keysight M9005A PXIe Chassis User Guide
Safety Information
Advertisement
Table of Contents
