Saving Settings Retentively - Siemens SIRIUS PROFINET Manual

Note
If the "Parameters disabled CPU/Master" parameter is "Off" (basic factory setting), the
parameters set on the soft starter are overwritten with the values stored in the GSD file or
OM during bus startup. If this is not desired, the parameter must be set to "On".
6.1.2

Saving settings retentively

In order to save the settings retentively, proceed as follows:
PROFINET Communication Module for SIRIUS Soft Starter 3RW44
Manual, 12/2013, A5E31996495002A/RS-AA/001
6.1 Activation of the PROFINET communication module via the display
Commissioning
33