Siemens SIRIUS PROFINET Manual page 81

Process data
DO 0.0
DO 0.1
DO 0.2
DO 0.3
DO 0.4
DO 0.5
DO 0.6
DO 0.7
DO 1.0
DO 1.1
DO 1.2
DO 1.3
DO 1.4
DO 1.5
DO 1.6
DO 1.7
Note
In "Automatic mode", the PLC provides the process image of the outputs. In this case, when
data record 68 is read at the local device interface, the process image of the outputs is
returned as it was transferred from the PLC.
PROFINET Communication Module for SIRIUS Soft Starter 3RW44
Manual, 12/2013, A5E31996495002A/RS-AA/001
Process image
(16 O (outputs), DO 0.0 to DO 1.7)
Motor right
Motor left
Not assigned (brake)
Trip Reset
Emergency start
Not assigned (self-test)
Slow speed
Not assigned
Output 1
Output 2
Parameter set bit 0
Parameter set bit 1
Not assigned
Not assigned
Not assigned
Lock quickstop
A.1 Data formats and data records
Appendix
81