Product Description - Siemens SIRIUS PROFINET Manual

Product description

The SIRIUS 3RW44 soft starter can be equipped with an optional PROFINET
communication module (product version E12 or higher). With the help of the PROFINET
communication module, the 3RW44 soft starter and its complete functionality can be
integrated in a PROFINET environment.
An interface enables the connection of the soft starter to PROFINET as well as its operation
and parameter assignment. Likewise, the "Soft Starter ES 2007" software for operator
control and monitoring and parameter assignment can be connected to this interface using a
PC and connection cable.
Requirements for the use of the PROFINET communication module
● You have connected the SIRIUS 3RW44 soft starter.
● You have configured an S7 station, e.g., with CPU315-2 PN/DP.
● STEP 7 (V 5.5 or higher) is fully installed on your PC or programming device.
● You have knowledge of STEP 7.
● The programming device is connected to the PROFINET IO controller.
Note
The PROFINET communication module only works with 3RW44 devices with product
version "E12" and firmware version V1.11.0 or higher.
Note
For devices with product version E12 and firmware version 1.10.5, the PROFINET
communication module independently performs a firmware update to version 1.11 after
activation of the fieldbus interface.
PROFINET Communication Module for SIRIUS Soft Starter 3RW44
Manual, 12/2013, A5E31996495002A/RS-AA/001
3
17