Commissioning
6.1
Activation of the PROFINET communication module via the display
You can activate the PROFINET communication module ("Fieldbus" device function) via the
display on the 3RW44 soft starter.
Note
The PROFINET communication module only works with 3RW44 devices with product
version "E12" and firmware version V1.11.0 or higher.
Note
Following activation of the communication module, the default control priority automatically
switches from the inputs to "SPS über Feldbus PROFINET" (PLC via PROFINET fieldbus)
(automatic mode).
If an input with the "Manual operation local" function is active, the control priority does not
change.
PROFINET Communication Module for SIRIUS Soft Starter 3RW44
Manual, 12/2013, A5E31996495002A/RS-AA/001
6
31