Siemens SIRIUS PROFINET Manual page 35

8. Select the "Field bus interface" check box on the right side of the window.
9. Select "Device parameters > Field bus interface" on the left side of the window.
10. On the right side of the window, select "PROFINET IO" as the Interface type.
11. You can set the parameters for communication under "Device parameters > Field bus
interface > PROFINET Parameters".
12. To transfer the changed parameters to the soft starter, select the "Load to Switching
Device" button in the toolbar or select "Target System > Load to Switching Device > All
Parameters" in the menu.
13. Acknowledge the changed PROFINET parameters with "OK".
PROFINET Communication Module for SIRIUS Soft Starter 3RW44
Manual, 12/2013, A5E31996495002A/RS-AA/001
6.2 Activation of the PROFINET communication module via software
Commissioning
35