Table of Contents
Advertisement
Description
2.1
General
This section describes the general differences for the serial interface module and for data
exchange when operated in a SIMOTION system as compared to a SIMATIC system.
Note
This manual is a supplement to SIMATIC manual
This documentation is supplied with the SIMOTION SCOUT in electronic form!
The function blocks have been developed for the ET 200S 1Sl serial interface module (3964R,
ASCII) with Article No. 6ES7 138-4DF0☐-0AB0.
The following software versions are required for the standard functions described in this
documentation:
● SIMOTION SCOUT V4.0 or higher
● SIMOTION Kernel V4.0 or higher
● SIMOTION technology packages V4.0 or higher
2.2
Product description
The ET 200S 1SI serial interface module enables you to exchange data between your
SIMOTION system and another communication partner.
You can select the mode of communication for data exchange in the hardware configuration
of SIMOTION SCOUT. The serial interface module is displayed in the hardware catalog in the
following versions:
● 1SI 3964(R) (4 bytes)
● 1SI 3964(R) (8 bytes)
● 1SI 3964(R) (32 bytes)
● 1SI ASCII (4 bytes)
● 1SI ASCII (8 bytes)
● 1SI ASCII (32 bytes)
8-byte or 32-byte data transfers increase the throughput rate, but require more I/O memory
on the ET 200S rack, whereas 4-byte data transfers require less I/O memory on the ET 200S
Supplement to the ET 200S 1SI serial interface module
Function Manual, 01/2015, xxx
ET 200S 1SI Serial Interface Modules .
2
11
Advertisement
Table of Contents
