Description; General; Product Description - Siemens SIMOTION Function Manual

Description

2.1

General

This chapter describes the general differences and the common features of the AS-Interface
master modules CP 343-2 P, DP/AS-Interface Link 20E/Link Advanced, and IE/AS-
Interface Link PN IO that result from operating a SIMOTION system (as opposed to a
SIMATIC system) for data transfer and command interface operation purposes.
Note
This manual is a supplement to the following SIMATIC manuals:
SIMATIC NET CP 343-2/CP 343-2 P AS-Interface Master
●
SIMATIC NET DP/AS-Interface Link 20E
●
SIMATIC NET DP/AS-Interface Link Advanced
●
SIMATIC NET IE/AS-Interface Link PN IO
●
These documents are shipped with SIMOTION SCOUT in electronic form.
The following software versions are required for the standard function described in this
documentation:
● For AS-Interface master (CP 343-2 P, DP/AS-Interface Link 20E/Link Advanced):
– SIMOTION SCOUT V4.0 or higher
– SIMOTION Kernel V4.0 or higher
● For AS-Interface master IE/AS-Interface Link PN IO:
– SIMOTION SCOUT, V4.1 SP1 or higher
– SIMOTION Kernel, V4.1 SP1 or higher
2.2

Product description

The following modules can be operated using automation systems from both the SIMATIC and
SIMOTION ranges:
● CP 343-2 P
● DP/AS-Interface Link 20E
● DP/AS-Interface Link Advanced
● IE/AS-Interface Link PN IO
They permit the connection of an AS-Interface line to the above mentioned automation
systems.
Extension to the command interface for AS-Interface master modules
Function Manual, 01/2015
2
9