Command Line Recall; Command Line Erase; Multiple Commands On One Line; Change Directory - HP 64700 Series User Manual

the command line. Pressing < Shift> -< Tab> moves the cursor to
the previous word.

Command Line Recall

Softkey Interface commands that you enter are stored in a buffer
and may be recalled by pressing < CTRL> -R. Pressing < CTRL> -B
cycles forward through the recall buffer.

Command Line Erase

Instead of pressing the < Back space> key to erase command lines,
< CTRL> -U is a quick way to erase the current command line.
You can then reenter the command. Pressing < Clear line> erases
the command line from the cursor position to the end of the line.
Multiple Commands
You can enter more than one command at a time on the command
line by separating the commands with a semicolon (;).
on One Line

Change Directory

You can change your working directory while in emulation using
the "cd" command. This command does not appear on the softkey
labels.

Filters and Pipes

You can specify HP-UX filters and pipes as the destination for
information while using the "copy" command. See the description
of the "copy" command in this chapter for details.

Command Files

You can execute a series of commands that have been stored in a
command file. You can create command files using the
"log_commands" command or by using one of the editors available
on your host computer. See the chapter on command files in the
HP 64700-Series Emulators Softkey Interface Reference for more
information.
9-2 Timing: Commands