Saving The Configuration - HP 64700 Series User Manual

S aving the
1
Configuration
5-16 Using the External Analyzer
Refer to the chapter on "Coordinated Measurements" in the HP
64700-Series Emulators Softkey Interface Reference for more
information on setting up interactive measurements.
Save the changes to the configuration file either in a system defined
file or in a user file of your choice. The system defined file is:
/usr/hp64000/inst/emul/< product_number> /userconfig.EA
where < product_number> is the Hewlett-Packard product
number, such as "64742A" for the HP 64742A Motorola 68000
Emulator.
The user defined file can be any file name you specify.
If a system defined file name is used, the emulator will used that
configuration as the default when initializing the emulator.