Table of Contents
Advertisement
I nformational
1
Messages
STATUS: Marking complete, found xxx marks (abcd)
This message indicates marking has been completed in the post
processing. The xxx represents the total number of marks found for
all mark names (mark_a, mark_b, mark_c, and mark_d).
STATUS: Marking complete, marking limit of 511 exceeded
This message indicates marking has been completed in the post
processing and more than 511 events meet the conditions for
marking (abcd).
STATUS: Sample period is now < period> nsec/usec/msec
This message is displayed after a new sample period is entered.
Note that the entered values are rounded to values appropriate for
the analyzer.
STATUS: Sample rate is now < freqency> MHz/kHz/Hz
This message is displayed after a new sample rate is entered. Note
that the enterd values are rounded to values appropriate for the
analyzer.
Enter: 'Return' to toggle diagram labels between defined and
default
This message appears when entering the softkey labelled
< DISPLY> for the display option in the timing_diagaram. It is
used as a reminder on the toggle function.
< Execution messages>
The following messages indicate the status of an execute cycle:
"Waiting for trigger" Trigger event is not being found or not
enabled (trigger enable false, master enable false).
"External trace running" Trigger event has been found and trace
is being made.
Timing Messages C-3
Advertisement
Table of Contents
