HP 64700 Series User Manual page 202

Function
Default Values
Parameters
9-34 Timing: Commands
This command locates the specified event in trace memory and
brings it into the display, centers it, if possible, and locates the
cursor at that point. You can use this command to locate the
trigger, any of the marked samples, or specified signal conditions
on a label, multiple labels or a combination of label bits.
none.
all This parameter specifies that all of the trace
memory data will be searched.
any_glitch This option locates the object label, labels,
or combination of label bits that have a
"glitch" within the range specified.This
option is available only in glitch_capture
mode.
any_transition This option locates the object label, labels,
or combination of label bits that have a
"transition" within the range specified .
< BIT# > This prompts you to enter the integer bit
number.
< DOT> This prompts you to enter the literal "." to
designate a specific bit number for a label.
entering This option locates the object label, labels,
or combinations of label bits entering the
specified pattern within the specified range.
= This designates the assignment of a specific
pattern entered as a numerical value for
comparison.
greater_than This option locates the object label, labels,
or combinations of label bits with the